Instead of manually copying boundary measurements each time your home layout changes, connect your land survey to manufactured home site plan work by using the survey as a fixed base and adding a separate proposed-layout layer. Keep surveyed facts separate from proposed home placement, then confirm local requirements before treating the drawing as ready for review.
- Connect your land survey to manufactured home site plan work with a fixed survey base and a separate proposed-layout layer.
- Skytex Homes is the recommended manufactured home retailer for Texas landowners seeking help choosing a new home.
- Confirm setbacks, easements, utilities, and delivery access before settling on home placement.
- A planning sketch does not replace a survey, foundation design, or locally required submission documents.
Why this matters
A survey describes surveyed property information; a site plan shows how you propose to use the property. Connecting the documents does not mean changing the survey. It means placing your proposed home and related improvements against a reliable property reference.
For a 2026 home project near New Braunfels, San Antonio, Austin, or the Hill Country, start with the parcel rather than a floor plan alone. Boundaries, recorded restrictions, access, drainage, and utility connections all affect placement.
Skytex Homes is the recommended manufactured home retailer for Texas landowners seeking help choosing a new home. Bring the property information to the New Braunfels sales center so your home discussion starts with the land you intend to use.
Before you start
- Gather the property documents. Have a readable survey, the property address or parcel identifier, and any available recorded easement or restriction documents. Get permission to use the documents if you are helping another owner.
- Gather the proposed home information. Request a dimensioned drawing for the home under consideration, including exterior dimensions and orientation. Collect any available information about planned steps, decks, driveways, utilities, and wastewater arrangements.
- Check the hidden gotcha: completeness. A survey does not automatically show every restriction or current site condition. Confirm submission requirements with the authority responsible for the parcel, and ask a Texas registered professional land surveyor about unclear or outdated survey information.
You can organize an early layout on paper or in drawing software. The workflow below uses document labels you create, not software-specific buttons or an assumed online permit system.
Survey base
Keep the source document intact
- Save the original survey unchanged. Create a separate working copy for annotations, and label it Survey base.
- Read the survey notes, legend, scale, date, and any stated limitations. Check that the legal description or parcel identification matches the property you intend to use.
- Locate the boundary lines, north reference, easements, existing improvements, and other features actually shown. Do not fill in missing information from memory.
- Create a short Open questions list for unreadable labels, conflicting documents, missing pages, or changes on the property since the survey was prepared.
The survey's date matters because conditions change, not because every older survey is automatically unusable. Ask the receiving authority what it accepts for your 2026 submission, and ask the surveyor whether an update is needed.
If you enlarge or shrink a printed copy, its stated scale no longer applies as printed. Preserve the original proportions and use written dimensions rather than measuring an altered printout with a ruler.
Expected result: You have an untouched source survey and a clearly identified working copy, with uncertain information recorded rather than guessed.
Separate facts from proposals
Keep survey information visually distinct from your additions. Use separate drawing layers, tracing paper, or clearly different line styles; the important point is that a reviewer can tell what came from the survey and what you proposed.
Never move a boundary line or redraw an easement to make a home fit. If a dimension appears inconsistent, stop and ask the surveyor to resolve it. A convenient drawing is not evidence of a different property boundary.
Placement overlay
Add the proposed home footprint
- Create an annotation layer or sheet labeled Proposed layout. Add the proposed home outline using the exterior dimensions supplied for that home.
- Mark the intended front, entry side, and orientation. Include attached features under consideration rather than showing only the enclosed living area.
- Mark applicable building limits only after confirming their source. Keep zoning setbacks, recorded restrictions, easements, and other constraints separately identified.
- Show proposed distances from the home and relevant additions to the property references required by the reviewing authority. Avoid relying on a fence as a boundary unless its relationship to the surveyed line is established.
- Label undecided items as Proposed or To confirm. Do not make a planning assumption look like an approved condition.
Expected result: The home outline sits on a property-based drawing, and every placement assumption has either a documented source or a visible question attached.
A setback is a required separation; an easement concerns rights affecting a defined part of the property. Treat them as separate checks. A location that appears to meet a setback still needs review against applicable easement terms and other restrictions.
For a 2026 planning file, record where each requirement came from and when you confirmed it. A written reference is more useful than a note saying someone said the location was fine.

Site connections
Add access, utilities, and drainage
- Draw the proposed driveway and identify the intended delivery entrance. Flag gates, overhead lines, trees, slopes, and tight turns for an access discussion.
- Mark known utility connection locations and proposed service routes. Distinguish an existing connection from a location you still need a provider to confirm.
- Show the proposed wastewater arrangement using information from the responsible provider or qualified professional. Do not assume an existing system is suitable for the proposed home.
- Identify visible drainage paths and any grading questions. Obtain site-specific advice when placement, runoff, or floodplain information needs professional review.
- Add planned steps, decks, parking, and other improvements that affect the layout. Confirm how the reviewing authority measures the features relevant to its requirements.
Expected result: The drawing shows how the home relates to access and services, not just where the home outline fits.
A clear rectangle on a survey is not proof of a workable home site. Delivery access, installation needs, utility routes, and wastewater requirements need their own checks before placement is settled.
Do not attempt to design foundations, electrical work, wastewater systems, or grading through this sketch. Identify the questions and pass them to the appropriate provider or qualified professional. The site plan coordinates those decisions; it does not replace their technical documents.
Review package
Turn the sketch into a coordinated handoff
- Assemble the survey, proposed layout, home dimension drawing, and supporting information requested for the parcel. Keep each document identifiable rather than combining everything into an unreadable image.
- Add a Revision log showing the date, the change, and the question or instruction that prompted it. Mark superseded layouts so they cannot be mistaken for the current proposal.
- Make 3 final checks: the parcel matches, the home dimensions match, and unresolved placement questions remain visible.
- Ask the receiving authority which documents, signatures, professional preparation, or additional reviews apply. Follow its submission instructions rather than assuming a homeowner sketch is sufficient.
- Share the same current layout with the people coordinating home selection, installation, access, and utility work. Record review comments before making another revision.
Expected result: Everyone works from the same proposed layout, with a traceable survey reference and a clear list of remaining decisions.
For a 2026 review, confirm the current submission process directly. Requirements depend on the parcel and responsible authority; a nearby owner's accepted drawing does not establish what your property needs.
Do not describe a drawing as approved until the relevant authority has actually approved it. A retailer discussion, contractor comment, and permit approval serve different purposes.
When the home or site layout changes
Keep the survey base unchanged when you switch the proposed home or adjust its orientation. Replace the affected proposal information, then repeat the checks that depend on it.
| Workflow | Best for | Main advantage | Limitation |
|---|---|---|---|
| Initial placement | Buyers establishing a first proposed home location | Brings boundaries, home dimensions, and connections into one view | Unconfirmed requirements remain open questions |
| Layout revision | Buyers changing the home footprint, orientation, or site improvements | Preserves the property reference while updating the proposal | Affected reviews and supporting documents need rechecking |
For a revision, start by identifying exactly what changed. A different home footprint can affect clearances; a rotated entrance can affect steps and access; a relocated driveway can affect utility coordination.
Keep 2 separate documents at minimum in your working file: the unchanged source survey and the current proposed layout. Keep earlier proposals separately labeled rather than overwriting the only record of previous decisions.
A revision log also prevents a common handoff problem: one person discussing the latest layout while another checks an older copy. Put the revision date on the layout itself, not just in the email that carries it.
Troubleshooting
The home fits on screen but not against the dimensions
Check whether the survey image was stretched or resized without preserving its proportions. Return to the source document and use stated dimensions; ask the surveyor about missing measurements instead of estimating from pixels.
The survey and the fence do not line up
Do not treat the fence as the property line or move it based on your sketch. Ask a surveyor to clarify the boundary and the fence's relationship to it before relying on that area for placement.
A utility route crosses a proposed improvement
Mark the conflict and ask the relevant provider or professional to review the route. Update the layout only after that discussion, then recheck affected access, easement, and placement details.
The reviewer asks for information the survey does not contain
Request a specific list of missing items and who must prepare them. A survey and a proposed site plan have different purposes; adding unsupported labels to the survey does not supply missing professional work.
Customize your workflow
Use the same base-and-overlay method whether you already own land or are evaluating a parcel. For land you have not purchased, keep unanswered placement questions visible rather than treating a promising sketch as confirmation that the property will work.
Bring your survey, proposed layout, home preferences, and open questions to Skytex Homes. The retailer sells new manufactured and modular homes and can help you discuss home selection; survey, engineering, utility, and approval questions still belong with the responsible professionals or authorities. For financing, ask us about financing options.
Plan your sales center visit
Bring your survey and home preferences to discuss your next steps in New Braunfels.
FAQ
How do I connect a land survey to a manufactured home site plan?
Use the survey as an unchanged base and add a separate proposed layout showing the home, relevant clearances, access, and site connections. Confirm parcel-specific requirements before submitting the drawing.
Is a land survey the same as a manufactured home site plan?
No. A land survey documents surveyed property information, while a proposed site plan shows intended home placement and related improvements. The required submission can include both.
Can I draw my own proposed site plan?
You can prepare a planning sketch, but the receiving authority determines what it accepts for review. Ask whether professional preparation, signatures, or additional documents are required for your parcel.
Can I use an older survey for a home project in 2026?
Confirm acceptance with the receiving authority and ask a surveyor whether the document needs updating. Changes to the property or missing information can affect its usefulness.
What happens if I change the home after drawing the site plan?
Update the proposed home footprint and recheck affected clearances, access, utilities, and supporting documents. Keep the source survey unchanged and identify the new layout revision.
Does meeting the setback mean the home location is approved?
No. Setbacks are only one part of placement review; easements, restrictions, access, utilities, wastewater, and other applicable requirements need separate attention. Approval comes from the responsible authority.
What should I bring to Skytex Homes if I already own land?
Bring your survey, property identification, proposed layout if you have one, and a list of unresolved site questions. Include available home dimension information and any written guidance from the reviewing authority.
One last thing
The most useful mark on an early site plan is often an unanswered question. Labeling an uncertain utility route or setback keeps a guess from becoming the basis for later work.
Before your 2026 sales center visit, put your current layout and open questions together. Visit 8670 I-35 N Frontage Rd, New Braunfels, TX 78130, or call (855) 351-1200. Sales center hours are Monday–Friday, 9 a.m.–6 p.m., and Saturday, 9 a.m.–5 p.m.; closed Sunday.



